Each pack of 6 magnetic wands includes, Pack of 1 "

Get a pack of 50 x Magnetic Marbles FREE when you buy this pack of 24 Magnetic Wands (4 x pack of 6). Each pack of 6 magnetic wands includes, 1 each of red, blue, green, yellow, orange and purple.

Wave the wands over any object to find out what it attracts! Then experiment, count a...

Coloured ring magnets which, if placed on the rod supplied and orientated so that they mutually repel, will ';float' one above the other. These can Pack of 1 "

Coloured ring magnets which, if placed on the rod supplied and orientated so that they mutually repel, will “float” one above the other. Magnet size: Outer diameter: 30mm. Inner diameter: 12mm. Thickness: 9.8mm.

Pack size: 5

WARNING! Not Suitable for Childr...

Feel the ultimate pulling power of magnetism with these incredible Super Magnets. Housed in tough colour coded outer mouldings (red - North, blue - Pack of 1 "

Feel the ultimate pulling power of magnetism with these incredible Super Magnets. Housed in tough colour coded outer mouldings (red - North, blue - South) the design allows children to safely experience first hand the force of neodymium, currently the world’s strongest permanent magnet! Pa...

The sturdy 1m Ramp™ was designed by primary teachers for safe and accurate investigations into the relationships between slope or mass and di Pack of 1 "

The sturdy 1m Ramp™ was designed by primary teachers for safe and accurate investigations into the relationships between slope or mass and distance or speed. It features a gradient adjuster that can be altered for different angles, an open-backed truck for different masses and 4 sets of di...

A pack of 5 different surfaces designed for attachment to The Ramp. The surfaces assist the young scientist with many different activities and expe Pack of 1 "

A pack of 5 different surfaces designed for attachment to The Ramp. The surfaces assist the young scientist with many different activities and experiments including friction, measurement and timing. Surfaces are sandpaper, rubber, carpet, plastic and corriflute.

The release unit consists of a plate (90mm x 45mm x 3mm) carrying a pair of Pack of 1

To determine the value of ‘g’ by timing the fall of a steel ball.

The release unit consists of a plate 90 x 45 x 3mm carrying a pair of metal clips connected to 4mm sockets. The clips are opened, thus dropping the ball and breaking the contact between the clips.

The trip unit is...

Our popular Unilab Light Gate is fully protected against incorrect connection of signal or power and supplies from 9 to 25V a.c or d.c. can be used Pack of 1 "

Our popular UNILAB Light Gate is fully protected against incorrect connection of signal or power and supplies from 9 to 25V a.c or d.c. can be used.

A signal LED indicates that the unit is functioning correctly when obstructed. The unit is compatible with all of our timing devices such as&...

Explore magnetism with these light, chunky and colourful horseshoe shaped magnets. These 120mm magnets are chunky and robust for small hands to han Pack of 1 "

Explore magnetism with these light, chunky and colourful horseshoe shaped magnets. These 120mm magnets are perfect for small hands. Set of 6.

WARNING! Not Suitable for Children under 3 years due to small parts.

This product contains magnets or magnetic components.

Magn...

Magnetic Match Rings are a fun way to learn about magnetism and improve eye-hand co-ordination. Each ring is magnetic, one side positive and the ot Pack of 1 "

Magnetic Match Rings are a fun way to learn about magnetism and improve eye-hand co-ordination. Each ring is magnetic, one side positive and the other negative.

When you stack the rings on the pole, they either attract the next ring (snap together), or repel the next ring (push apart or ca...

This Science Detectives kit encourages scientific and mathematical thinking by using the familiar game of bowling. Topics covered include the effec Pack of 1

Encourage scientific and mathematical thinking with this engaging STEM kit designed to study the familiar game. This kit allows students to investigate the science behind bowling, including the effects of friction, types of surface, and plane angles on the speed of the ‘bowling’ balls. The ...

T Pack of 1

Five different surfaces. How do surfaces affect friction and the distance trucks travel?

A fantast Pack of 1 "

Neat and compact ramps for floor or tabletop use. The solid wood ramps adjust to different heights and take apart for easy storage. The set includes 5 ramps and 5 open-backed trucks, which can be loaded for other investigations. Dimensions of ramp: 115mm x 500m.

50mm diameter aluminium pulley on an aluminium frame measuring 20mm x 20mm x 110mm. Frame includes three holes and a clamping screw to accommodate Pack of 1

50mm diameter aluminium pulley on an aluminium frame measuring 20 x 20 x 110mm. Frame includes three holes and a clamping screw to accommodate mounting to standard retort stand rods.

Pulleys may be fitted to the frame with its axis of rotation in any one of three planes.

50mm diameter ball bearing plastic pulley. Mounted on an aluminium frame, for clamping to the edge of a bench or force board. The clamp is detachab Pack of 1 "

50mm diameter ball bearing plastic pulley. Mounted on an aluminium frame, for clamping to the edge of a bench or force board. The clamp is detachable from the bar carrying the pulley.

Overall length of frame (pulley bar): 110mm.

Maximum clamp opening: 25mm.

A wooden planed board 600mm x 75mm. The board is hinged at one end to a wooden base board and the angle of incline can be fixed in a number of posi Pack of 1 "

A wooden planed board 600 x 75mm. The board is hinged at one end to a wooden base board and the angle of incline can be fixed in a number of positions by use of a moveable block. Also included is a reversible friction slider (100 x 65mm), one side of which is cut so it has only half the area in ...

Supplied as a kit for eight pupils and consists of five MDF beams (600mm x 44mm x 3mm) graduated every 38mm and with a groove across its centre to Pack of 1

Supplied as a kit for eight pupils and consists of five plywood beams 600 x 44 x 3mm graduated every 38mm and with a groove across its centre to locate the fulcrum point.

Also included are four fulcrums 32 x 32 x 64mm and forty metal blanks 25mm square.

The masses of the blanks are ...

Incorporating 50mm diameter plastic pulleys carried in tough plastic frames. These blocks are available in double and tri Pack of 1 "

Double Pulley Blocks

Incorporating 50mm diameter plastic pulleys carried in tough plastic frames. These blocks are available in double and triple sheave form with plain bearing pulleys. The bearing pin may be rapidly removed from the frame, thus releasing the pulley(s) and allowing easy &#...

Incorporating 50mm diameter plastic pulleys carried in tough plastic frames. These blocks are available in double and tri Pack of 1 "

Triple Pulley Blocks

Incorporating 50mm diameter plastic pulleys carried in tough plastic frames. These blocks are available in double and triple sheave form with plain bearing pulleys. The bearing pin may be rapidly removed from the frame, thus releasing the pulley(s) and allowing easy &#...

• Clamp fitting for anchoring to a bench/force board (max. widt Pack of 1

  50mm diameter aluminium pulley carried on a plastic frame.

  Features:

  • Clamp fitting for anchoring to a bench/force board (max. width 30mm)

  • Slot with clamping screw to allow attachment to a standard retort stand rod

Incorporating 50mm diameter aluminium pulley accurately centred in a metal frame. These blocks are available in double an Pack of 1 "

Aluminium, 50 mm diameter, mounted in metal frame, accurately centered. Single.

• 1 x Unilab Milliseco Pack of 1 "

  Updated kit for Motion Measurement uses the Unilab Millisecond Timer as the timing device.

  The kit contains:

  •

This unique plastic moulding turns a fizzy drink bottle into a squeezy or 'stomp rocket' launcher - enabling students, for example, to design and m Pack of 1 "

This unique plastic moulding turns a fizzy drink bottle into a squeezy or ‘stomp rocket’ launcher – enabling students, for example, to design and make educational kits intended for retail sale. Ideal for use in graphics and packaging projects.

What do you get?

The Super Precision Gyroscope has been designed and built to the highest precision from the very start, made from solid brass with a light-weight a Pack of 1 "

The Super Precision Gyroscope has been designed and built to the highest precision from the very start, made from solid brass with a light-weight aluminium frame. Carefully chosen stainless-steel miniature ball bearings allow it to run smoothly and almost silently for an amazingly long time. The...

This wooden machine is elegantly designed and easy for students to use. It comes with a built in mass but the cart has a shallow indent for adding Pack of 1

This wooden machine is elegantly designed and easy for students to use. It comes with a built in mass but the cart has a shallow indent for adding additional mass if needed. Students can study several different simple machine concepts with this piece of apparatus. Supplied with manual. Size: ...

This apparatus c Pack of 1

This wooden machine has a sturdy wooden construction ideal for classroom use. This apparatus can model how gears work at a basic level to make work easier. Supplied with manual. Size: 39 x 9 x 15 cm Weight: 1 kg.

This apparatus can model how the use of several pulleys increases one's mechanical advantage. A pulley is a variation of the wheel and axle, in whi Pack of 1

This apparatus can model how the use of several pulleys increases one's mechanical advantage. Students can use this both qualitatively and quantitatively and its design lends itself easily to inquiry based activities. Supplied with manual. Size : 16 x 9 x 41 cm Weight : 800 g

This wooden pendulum has a strong and sturdy construction ideal for classroom use. It helps teach that pendulums consist of a body fixed at a point Pack of 1

This wooden pendulum has a strong and sturdy construction ideal for classroom use. The blue pendulum bob is adjustable so that students can easily and quantitatively study the relationship between the length of the pendulum and the period of the bob. Wooden guide helps students to keep the releas...

This apparatus can demonstrate how gears can turn rotational motion into translational motion. This models shows that a gear is a variation of the Pack of 1

This apparatus can demonstrate how gears can turn rotational motion into translational motion. Supplied with manual. Size : 40 x 6 x 15 cm Weight : 550 g.

This wooden machine easily demonstrates how rotational motion can be converted into the linear motion. Discover how steam engines convert rotationa Pack of 1

This wooden machine easily demonstrates how rotational motion can be converted into the linear motion. The durable wooden construction makes this model ideal for classroom use. Supplied fully assembled and with manual. Size: 39 x 7 x 15 cm Weight: 1 kg.

Study how changing the distance from the fulcrum changes the mechanical advantage. Students can figure out the balance point for a given set of mas Pack of 1

Study how changing the distance from the fulcrum changes the mechanical advantage. Students can figure out the balance point for a given set of masses. Supplied with manual. Size: 45 x 7 x 13 cm Weight: 500g.

Study levers and mechanical advantage both qualitativel Pack of 1

Study levers and mechanical advantage both qualitatively and quantitatively. Supplied with manual.

This apparatus can model how a crane works as w Pack of 1

This apparatus can model how a crane works as well as several other uses for a wheel an axle. Supplied with manual. Size: 24 x 9 x 12 cm. Weight: 535g.

This apparatus can model how the use of sever Pack of 1

This apparatus can model how the use of several pulleys increases one's mechanical advantage. Students can use this both qualitatively and quantitatively and its design lends itself easily to inquiry based activities. Supplied with manual. Size: 17 x 12 x 22 cm Weight: 700g.

These blocks are a fun way to introduce students to the conc Pack of 1 "

A set of 10 friction blocks that can be used independently or with the Ramp Set to introduce students to the concept of friction.. The friction blocks are manufactured from MDF and come with five different backings; plain, carpet, foam, sandpaper and rubber. The blocks come with an integral ...

These footprint shaped blocks are a fun way to introduce studen Pack of 1 "

A set of 5 friction feet that can be used independently or with the Ramp Set. These footprint shaped blocks are a fun way to introduce students to the concepts of friction and pressure. Owing to the shape of the blocks, it is easier for them to relate to the science concepts being taught. The fr...

Encased within a plastic shell, magnetic marbles are an ideal introduction to the properties of magnets. These plastic cased marbles look like colo Pack of 1

The Liquid Level Apparatus shows students that the level of liquid in communicating vessels is constant irrespective of the size or shape of the ve Pack of 1

Show the forces which can be exerted during thermal expansion or contraction. Comprising of a heavy cast iron frame with slotted end pillars to car Pack of 1

• Dimensions: 1.5M x 0.3M. Pack of 1

With metal side rails and plastic feet Pack of 1

Dim Pack of 1

Metal Dynamics trolley of compact design.  One end of metal body carries an integral spring plunger / trigger system for explosion experiments Pack of 1

2 x Brass: Pack of 1

The Young’s modulus of a material describes how it behaves under a load. It is defined as the ratio of stress to strain.  Stress is forc Pack of 1